SU0325L0330R18
325L
aoikshfj;ljbvsdbvkjhvfdzsa
dddd
frerg
ghjhg
gsdf
Marshal Pro

325L Marshal Pro | 100m Buddy Smart Reel

The NEW higher capacity Marshal Pro stands out from the rest as a powerful compact spray unit built for the UTV / ATV. With a high performance pump and motor set-up and the Buddy Smart Reel, the Marshal Pro is a dynamic and robust UTV sprayer.

 

VIEW PARTS BREAKDOWN VIEW SPARE PARTS

 

 

  • 325L Marshal Pro UV-stabilised poly tank with 15-year warranty
  • 33L/min 580psi Maruyama pump with 3-year warranty
  • Honda GX200 motor with 3-year warranty
  • Buddy Smart Reel with 100m x 8mm hose
  • 3-way regulator and gauge
  • AHG103 mental handle spray gun
  • Moulded tie-down points
  • Suction filter with auto shut-off
  • Powder coated steel pump plate
  • 250mm screw lid with basket filter
  • Anti-spill lip around lid
  • Front drain bung
  • New angled galvanised mounting feet for complete drainage and safe loading included.

 

The Marshal Pro is assembled to your order. To confirm lead time please contact us or visit your local dealer.

$12,032.00

Weight
  102 kg
Dimensions
  1050L x 900W x 920H mm
SKU #SU0325L0330R18
Enquire

Additional information

Weight102 kg
Dimensions1050 × 900 × 920 mm

FAQs

Is this product made in Australia?

Yes! This tank is made in New South Wales, Australia and comes with a 15-year tank warranty.

Is this sprayer compatible with boom spraying?

Yes, the Flat Fold Boom is a compatible booms for this unit. The nozzles can be replaced for different spray patterns/coverage depending on your requirements. This can be used for weed control or fertiliser spray.

What type of oil can be used in this pump?

We recommend 10w-30 for this pump, however always consult the pump manual for your unit.

How to pair your Buddy Smart Reel remote.

  1. Make sure you’re within reach of the Buddy Reel switch panel while holding the remote.
  2. Turn Reel On – Check that the reel is powered and switched on. It should flash 0.
  3. Prepare the Remote:
    • If your remote has no batteries, insert one battery.
    • If your remote already has batteries, remove one.
    • Insert the remaining battery halfway so it’s ready to be pushed in.
  4. Activate Pairing:
    • Press and hold both buttons on the remote.
    • At the same time, push the battery fully into place.
  5. Look for Flashing Lights:
    • The remote’s green light will flash slowly.
    • The reel’s switch panel display will flash PA slowly.
  6. Confirm Pairing:
    • Within 10 seconds, press the manual rewind button (↵) on the reel’s switch panel.
    • The display will flash PA quickly, then return to 0 (steady).
    • The remote’s green light may keep flashing for a few more seconds before stopping.
  7. Test the Remote:
    • Once the green light stops flashing, press either button.
    • The reel should respond, confirming successful pairing.

Now your remote is ready to use!

 

Related products